The command line PKT wallet

First Time Installation and Launching

Download pktd

Microsoft Windows

  • Download the most recent zip archive suffixed with available from
    pktd releases page

For example:

  • Unarchive the content of the zip file
  • Open the command prompt and navigate to the bin directory in the extracted archive
  • For Example: cd Downloads\pktd*\bin
  • Follow the instructions below but
  • In place of ./bin/pktwallet, use pktwallet.exe
  • In place of ./bin/pktctl, use pktctl.exe

MacOS and Linux

  • Download one of the most recent packages available for Linux or MacOS from
    pktd releases page

For example, for pktd-v1.4.0 release:

  • For MacOS, after having downloaded pktd-v1.4.0-macos.pkg,
    install pktwallet and other utilities by clicking on the package icon in the Finder.

  • For Linux, after having downloaded one of the following packages:

  • pktd-v1.4.0-linux.deb (Debian or Ubuntu)
  • pktd-v1.4.0-linux.rpm (Fedora or RedHat)
  • pktd AUR package (Arch linux or Manjaro),
    install pktwallet and other utilities by clicking on the appropriate package icon or running an installation command

Creating a New Wallet

To create a new PKT wallet, use the pktwallet --create command:

./bin/pktwallet --create

You will be prompted to follow a few steps. Make sure you write your seed words on paper so that you can recover your funds even if your computer is damaged. Do not skip this step. You will thank yourself later. Keep it secret. Keep it safe.

Launching pktwallet

After creating your wallet, you can launch pktwallet with:


Watch the output from the logs and when you see a log line like this:

1608294386 [INF] headerlogger.go:64 Processed 1 block in the last 24.82s (height 702781, 2020-12-18 13:26:01 +0100 CET)

Compare the height number in the log line (e.g. 702781) to the number in the pkt block explorer to see when your wallet is up to date. A complete sync from a new installation can take 12+ hours. During this time, the balance in your wallet will not be accurate and you will be unable to transact. You may, however, proceed with creating an address while syncing, as detailed below.

Creating a New PKT Address

While pktwallet is running in the background (or in another terminal), use the following command:

./bin/pktctl --wallet getnewaddress

You should see a series of numbers and letters beginning with pkt1. This is your newly created PKT address which you can use for receiving coins. If you need to view it after creation, the address, along with the balance, can be seen in the output from running:

./bin/pktctl --wallet getaddressbalances 1 1

NOTE: Every time you use getnewaddress, the address you receive must be remembered by pktwallet forever. So, only use it when you actually need an address.

How to install the PKT World Wallet (Windows only)

  1. Download the PKT World Wallet
  2. Follow the installation instructions
  3. Launch wallet
  4. Create a new wallet
  5. Enter a wallet passphrase. Make sure to save your passphrase in a safe place.
  6. Write down your wallet seed. It is very important to keep your seed in a safe place
  7. To generate a new PKT address, click Wallet.
  8. Generate new address
  9. To begin mining using the PKT World Wallet, click Miner
  10. Start Mining

How to install a CLI Wallet

If you already have a wallet created on your computer called wallet.db you will need to create a new wallet by following these steps:

  1. Download pktd-v1.5.1-macos.pkg
  2. Run the installation
  3. Open Terminal
  4. Enter the command: $ cd pktd
  5. Enter the command: $ ~/pktd/bin/pktwallet --create --wallet xxxx
    xxxx is the name of the wallet i.e. wallet personal
    Make sure to write this down for your notes
  6. Enter passphrase or leave empty
    Make sure to write this down for you notes
  7. Do NOT add additional layer of security
  8. Copy down your seed. If your wallet is destroyed, you can recover it as long as you have this seed and your wallet passphrase. Please keep in mind that anyone who has access to the seed only needs to guess your wallet passphrase to access your funds.
  9. Follow the instructions to finalize wallet

How to start up CLI Wallet

  1. Open terminal
  2. Enter the command: $ cd pktd
  3. Enter the command:
    $ ~/pktd/bin/pktwallet --wallet
    (whatever you named your wallet) i.e wallet personal

How to create new PKT wallet address

  1. Make sure you have the CLI wallet running in a separate terminal window
  2. Open Terminal
  3. Enter command: $ cd pktd
  4. Enter command: $ ~/pktd/bin/pktctl --wallet getnewaddress
    Save your address in a safe place that is easily accessible

How to send PKT from your CLI wallet

  1. Make sure you have the CLI wallet running in a separate terminal window
  2. Command click on file to open
  3. Open terminal
  4. Enter command: $ cd pktd
  5. Enter Command: $ ~/pktd/pktd/bin/pktctl --wallet sendfrom pkt1xxxxx $$$$ '["pkt1xxxxx"]' xxxxx = PKT address you want to send from and to
    $$$$ = amount of pkt you want to send

How to install a CLI Wallet from Seed

If you already have a wallet created on your computer called wallet.db you will need to create a new wallet by following these steps:

  1. Download pktd-v1.5.1-macos.pkg
  2. Command click on file to open
  3. Run the installation
  4. Open Terminal
  5. Enter the command: $ cd pktd
  6. Enter the command: $ ~/pktd/bin/pktwallet --create --wallet xxxx
    xxxx is the name of the wallet i.e. wallet personal
    Make sure to write this down for your notes
  7. Enter passphrase or leave empty
    Make sure to write this down for you notes
  8. Do NOT add additional layer of security
  9. Enter seed
  10. Start up wallet (see instructions above)
  11. Open new terminal window
  12. Enter the command: $ cd pktd
  13. Enter the command: $ ~/pktd/bin/pktctl --wallet getnewaddress
    repeat until you find receive (each of) your recovered wallet address(es)
  14. Enter the command: $ ~/pktd/bin/pktctl --wallet resync
    This will resync the wallet to the blockchain (takes at least 24 hours)
  15. Enter the command: $ ~/pktd/bin/pktctl --wallet getaddressbalances 1 1
    this is how you view all your (sub)wallet balances

Using Your Wallet

pktctl is the program that interfaces with a running pktwallet instance. pktctl functions will not work if pktwallet is not running and accessible. Some functions will be limited until pktwallet is fully synchronized. Some functions require the wallet being unlocked before executing.

Getting Your Balance

You can check your current PKT balance using pktctl or you can check the balances of each of your addresses if you have more than one.

./bin/pktctl --wallet getbalance


./bin/pktctl --wallet getaddressbalances

getaddressbalances by itself will not show 0 balance addresses you may have created. To show these addresses, use:

./bin/pktctl --wallet getaddressbalances 1 1

For more explanation of the meaning of the output of getaddressbalances, use:

./bin/pktctl --wallet help getaddressbalances

Unlocking Wallet

While many functions can be performed while the wallet is locked, other functions first require the wallet to be unlocked, including sending PKT and folding. The passphrase used to unlock the wallet was set when creating the wallet.

To unlock your wallet for 120 seconds (this can be changed to your liking), use:

./bin/pktctl --wallet walletpassphrase <passphrase you used when creating wallet> 120

To keep your wallet unlocked, use:

./bin/pktctl --wallet walletpassphrase <passphrase you used when creating wallet> 0

If using 0 as in the previous example to keep your wallet indefinitely unlocked, it will stay unlocked until you either restart pktwallet or run:

./bin/pktctl --wallet walletlock

NOTE: Special characters (e.g., !, #, & *) in your passphrase may be incorrectly interpreted by your shell. You may need to wrap your passphrase in quotes.

./bin/pktctl --wallet walletpassphrase 'suP3r_S3cReT^P@s5W0Rd!' 120

Sending PKT

You can send PKT using the sendtoaddress command, but first you must unlock your wallet for sending, as shown in the previous step.

To send cjd a 10 PKT tip:

./bin/pktctl --wallet sendtoaddress pkt1qt8xe7dwpelngtcpsgn5nkj3pwwdm7gf3l4auax 10

Sending PKT from Specific Address

pktwallet gives you control over which addresses are used for making a payment. This means you can keep different PKT in your wallet separate, for example separating business transactions from personal transactions.

NOTE: PKT is not a "privacy coin", so transactions are still shown in the blockchain like with Bitcoin.

Unlock wallet:

./bin/pktctl --wallet walletpassphrase <passphrase you used when creating wallet> 60

Send 10 PKT to "their address" from "your address":

./bin/pktctl --wallet sendfrom <their address> 10 '["<your address>"]'

Notice the '[". This is because the last argument is actually a quoted JSON array. This means you can use multiple addresses as the source of a payment. For example:

./bin/pktctl --wallet sendfrom <their address> 10 '["<your address>", "<your other address>"]'

Windows users require unique formatting for command prompt:

pktctl.exe --wallet sendfrom <their address> 10 [\"<your address>\"]

Sweeping an Address

With pktwallet, sending 0 PKT has special significance in that it will send "as much PKT as possible". To sweep <old address> address into <new address>, you can use the following command:

./bin/pktctl --wallet sendfrom <new address> 0 '["<old address>"]'


pktctl.exe --wallet sendfrom <new address> 0 [\"<old address>\"]

NOTE: Sweeping an address will send as much PKT as possible, which is not necessarily all PKT in that address. You may need to sweep multiple times before the address is empty.

Folding Coins

If you are the recipient of many transactions, such as is the case in mining, you may not be able to spend all of them at once. This is similar to someone who is paid in pennies having a difficult time using the pennies to buy a car. To solve this issue, you can consolidate all of the coins which were paid to you by folding.

Folding is sweeping an address to itself. Just like in sweeping, you may need to run the command many times before you have completely folded. See FAQs for more detail.

For example:

./bin/pktctl --wallet sendfrom <address> 0 '["<address>"]'


pktctl.exe --wallet sendfrom <address> 0 [\"<address>\"]

Alternative GUI Wallets

NOTE: Electrum is not appropriate for mining. Do NOT mine into an electrum wallet!


I have several machines mining, do I need the wallet running on each machine?

NO! In fact, the wallet doesn't need to be running at all to mine, but you do need to ensure you have control of the address you are mining to.

Should I leave pktwallet running?

It is not a requirement to have pktwallet running to mine. However, if you leave it running, it will stay synced. This will save time when performing pktctl functions, such as folding and sending coins. If pktwallet has not been running for some time, it will need time to sync up to the current block from the time it last ran. As a safety precaution, don't forget to lock your wallet if you do keep it running.

How often should I fold and why?

The purpose of folding is to turn all your small payments (such as from mining) into quickly and easily spendable coins. If you are multi-pool mining and have rewards in every block, you will have roughly 1440 unconsolidated transactions per day - one for each block at a rate of ~ 1 block/min. If you do not fold these transactions, after awhile you'll have a huge amount of transactions to process if you wish to send the sum or portion thereof of these smaller transactions. So, while folding isn't required and will have no impact on mining if you do or do not, you're doing yourself a favor later by keeping the transactions as consolidated as possible. It is typical to fold as much as possible every day or every few days when you think about it, depending on your use case. It can also be scripted. Note that folding is a transaction itself. Depending on how much you have to fold, you may need to run the command many times. You also may need to wait for coins to confirm before folding more. Once the folding command fails or you see a very low number in the outputcount field from running ./bin/pktctl --wallet getaddressbalances 1 1 or on PKT block explorer under Unconsolidated Txns, you have successfully folded the best you can for that point in time.